VARME KILDEN TYND

Tynd, High technical drawing

Tynd, with a technical and high tech design, perfect for modern environments with a strong personality.

Varme Kilden Tynd, with a completely smooth front surface but with the edges sloping inwards, is the maximum synthesis of minimalist design and is the perfect solution for the most modern and/or environments linked to clear and well-defined lines. However, its "fine" appearance must not deceive because Tynd, like all other Varme Kilden models, it is an energy-efficient griddle. Once installed on the wall, it has a maximum wall projection is 50 mm for standard ½”connections.

Download the technical sheet in pdf - 400k

Characteristics

PREPARED FOR: 1/2 "valves and lockshields positioned on the inside of the rear side, according to the exclusive Varme Kilden system.

THERMOSTATIC VALVE WITH REGULATION PRESET: incorporated in the manifold, supplied as standard.

WORKING PRESSURE: maximum 6 bar.

MAXIMUM WORKING TEMPERATURE: not higher than 100°C, the operating temperature of the circuit recommended is 40°C for heat pumps and 55°C for condensing boilers.

They also operate with the classic temperatures of normal radiators, ie between 65 and 75°C.

WALL ANCHORING: in two versions for horizontal and vertical mounting, with a system that allows their rapid removal in case of need.

The product is equipped with wall fixing brackets, a lower retractable safety device and a special cap for venting the air.

PACKAGING: in cardboard, polystyrene and shrink plastic film.

RECYCLABILITY: 100% of the product.

TO ORDER THE PLATE: whether it is to be installed vertically or horizontally, the measurements will always be the same: the first measure corresponds to the horizontal dimension and the second to the vertical one.

CODE COMPOSITION EXAMPLE: A plate 400 mm wide and 1400 mm high to be installed vertically it will be a VK4/1400-V. A 700 mm wide and 2000 mm high plate to be installed horizontally will be a VK7/2000-H.